BPPRO WSS(wetlook stabilizing sealer)

Acetone based single component sealer designed specifically for block pavers
Creates a paver surface that enriches and seals block paver while stabilizing paver joint sand
Gives pavers that satin WET LOOK
Surface and joint sand should be thoroughly dry before installation of sealer
Sealer should be applied by heavily flooding surface to be sealed/stabilized with acetone comparable sprayer or watering can

Description

Acetone based single component sealer designed specifically for block pavers
Creates a paver surface that enriches and seals block paver while stabilizing paver joint sand
Gives pavers that satin WET LOOK
Surface and joint sand should be thoroughly dry before installation of sealer
Sealer should be applied by heavily flooding surface to be sealed/stabilized with acetone comparable sprayer or watering can
Then squuuggee excess sealer over joints to ensure complete saturation of joint sand
A second coat can be applied to achieve increased gloss finish
Dry time. 15 min-1 hr
Set up takes 1-2 hrs after dry
Cure time. Initial joint sand set up happens quickly but it will take 24 hrs
Trafficking. Avoid pedestrian traffic after drying before the surface has set up and wait at least 24 hrs for vhicular use

Reviews

There are no reviews yet.

Be the first to review “BPPRO WSS(wetlook stabilizing sealer)”

Your email address will not be published. Required fields are marked *