Glaze n Seal “wet look” lacquer

NOT for use on glazed ceramic tile, porcelain, sealed tile, very dense stone,brick,or quarry tile
Will retard efflorescence but not eliminate it
Surface must be clean and dry before application
If acid was used prior, surface must be neutralized
Apply 2-4 light coats
DO NOT LET PUDDLE
Apply with pressurized sprayer

Description

NOT for use on glazed ceramic tile, porcelain, sealed tile, very dense stone,brick,or quarry tile
Will retard efflorescence but not eliminate it
Surface must be clean and dry before application
If acid was used prior, surface must be neutralized
Apply 2-4 light coats
DO NOT LET PUDDLE
Apply with pressurized sprayer
Each coat should be dry to the touch before next one applied
Allow extra drying time when moist out
Apply in temps 55-80 f
Wait 6 hrs before foot traffic and 72 hrs before vehicular use
Will typically cover 100-400 sq ft per gallon depending on pourousity of surface

Reviews

There are no reviews yet.

Be the first to review “Glaze n Seal “wet look” lacquer”

Your email address will not be published. Required fields are marked *